DIN 125-A FLAT WASHER — M12: inside diameter 13–13.27 mm, outside diameter 23.48–24 mm, thickness 2.3–2.7 mm, pitch 1.75 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per ISO 4759-3 — product grade A.
WASHERS
| Inner Diameter (d1) | 13–13.27 mm |
| Outer Diameter (d2) | 23.48–24 mm |
| Thickness (h) | 2.3–2.7 mm |
| Pitch | 1.75 mm |
| Tensile Strength | 700 MPa |
| Material | A2-70 |
| Surface | Stainless Steel |
Dimensional tolerances per ISO 4759-3 — product grade A.
Grade A2-70 · Stainless Steel
Grade A2-70 · Plain
Grade A4-70 · Stainless Steel
Grade A4-70 · Plain
Contact engineering team for verified B2 data reference.
DIN 125-A Flat Washer per DIN 125-A specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.
13–13.27 mm (nominal with the tolerance range shown above)
23.48–24 mm (nominal with the tolerance range shown above)
2.3–2.7 mm (nominal with the tolerance range shown above)
1.75 mm
Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.
ISO 4759-3 — product grade A.
Inside diameter 13–13.27 mm, outside diameter 23.48–24 mm, thickness 2.3–2.7 mm, pitch 1.75 mm. Tolerances per ISO 4759-3 — product grade A.
A2-70 stainless steel with 700 MPa tensile strength. Other grades and finishes can be quoted on request.