DIN 125-A FLAT WASHER — M3: outside diameter 5.2–5.5 mm, thickness 0.45–0.55 mm, pitch 0.50 mm. Dimensional tolerances per ISO 4759-3 — product grade A.
WASHERS
| Outer Diameter (d2) | 5.2–5.5 mm |
| Thickness (h) | 0.45–0.55 mm |
| Pitch | 0.50 mm |
| Tensile Strength | — |
| Material | — |
| Surface | — |
Dimensional tolerances per ISO 4759-3 — product grade A.
No grade data available
Contact engineering team for verified B2 data reference.
DIN 125-A Flat Washer per DIN 125-A specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.
5.2–5.5 mm (nominal with the tolerance range shown above)
0.45–0.55 mm (nominal with the tolerance range shown above)
0.50 mm
Material: —, surface: —, tensile strength: —.
ISO 4759-3 — product grade A.
Outside diameter 5.2–5.5 mm, thickness 0.45–0.55 mm, pitch 0.50 mm. Tolerances per ISO 4759-3 — product grade A.
Dimensional tolerances for this washer follow ISO 4759-3, product grade A, as listed in the table on this page.