DIN 125-A FLAT WASHER — M36

DIN 125-A FLAT WASHER — M36: inside diameter 37–37.62 mm, outside diameter 64.8–66 mm, thickness 4.4–5.6 mm, pitch 4.00 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per ISO 4759-3 — product grade A.

WASHERS

High-performance industrial fastener under DIN 125-A standard.

CEV-1 HASH: dd396c661df0dad9c0e90b823caa490345fe58f083f1f3031f2373ac40f2d348 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Inner Diameter (d1)	37–37.62 mm
Outer Diameter (d2)	64.8–66 mm
Thickness (h)	4.4–5.6 mm
Pitch	4.00 mm
Tensile Strength	700 MPa
Material	A2-70
Surface	Stainless Steel

Dimensional tolerances per ISO 4759-3 — product grade A.

Grades

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

← Back to DIN 125-A FLAT WASHER → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 125-A reference (fasteners.eu)

DIN 125-A Flat Washer per DIN 125-A specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the inside diameter of DIN 125-A FLAT WASHER — M36?

37–37.62 mm (nominal with the tolerance range shown above)

What is the outside diameter of DIN 125-A FLAT WASHER — M36?

64.8–66 mm (nominal with the tolerance range shown above)

What is the thickness of DIN 125-A FLAT WASHER — M36?

4.4–5.6 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 125-A FLAT WASHER — M36?

4.00 mm

What material, finish and strength does this page list?

Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

ISO 4759-3 — product grade A.