DIN 125-A FLAT WASHER — M5

DIN 125-A FLAT WASHER — M5: outside diameter 7.64–8 mm, thickness 0.9–1.1 mm, pitch 0.80 mm. Dimensional tolerances per ISO 4759-3 — product grade A.

WASHERS

High-performance industrial fastener under DIN 125-A standard.
CEV-1 HASH: 5a538d84159a6cfdeb21c68cc54929ea9c8ebf1e0ea6fdfb474223d071ca9e85 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Outer Diameter (d2)7.64–8 mm
Thickness (h)0.9–1.1 mm
Pitch0.80 mm
Tensile Strength—
Material—
Surface—

Dimensional tolerances per ISO 4759-3 — product grade A.

Grades

—

No grade data available

← Back to DIN 125-A FLAT WASHER → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 125-A reference (fasteners.eu)

DIN 125-A Flat Washer per DIN 125-A specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the outside diameter of DIN 125-A FLAT WASHER — M5?

7.64–8 mm (nominal with the tolerance range shown above)

What is the thickness of DIN 125-A FLAT WASHER — M5?

0.9–1.1 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 125-A FLAT WASHER — M5?

0.80 mm

What material, finish and strength does this page list?

Material: —, surface: —, tensile strength: —.

Which tolerance basis is used on this page?

ISO 4759-3 — product grade A.