DIN 125-A FLAT WASHER — M6

DIN 125-A FLAT WASHER — M6: inside diameter 6.4–6.62 mm, outside diameter 11.57–12 mm, thickness 1.4–1.8 mm, pitch 1.00 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per ISO 4759-3 — product grade A.

WASHERS

High-performance industrial fastener under DIN 125-A standard.

CEV-1 HASH: e0dd0b888c67bfba4b9616f7752e1350e69080347d8a6b2a06750cd338e01505 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Inner Diameter (d1)	6.4–6.62 mm
Outer Diameter (d2)	11.57–12 mm
Thickness (h)	1.4–1.8 mm
Pitch	1.00 mm
Tensile Strength	700 MPa
Material	A2-70
Surface	Stainless Steel

Dimensional tolerances per ISO 4759-3 — product grade A.

Grades

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

← Back to DIN 125-A FLAT WASHER → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 125-A reference (fasteners.eu)

DIN 125-A Flat Washer per DIN 125-A specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the inside diameter of DIN 125-A FLAT WASHER — M6?

6.4–6.62 mm (nominal with the tolerance range shown above)

What is the outside diameter of DIN 125-A FLAT WASHER — M6?

11.57–12 mm (nominal with the tolerance range shown above)

What is the thickness of DIN 125-A FLAT WASHER — M6?

1.4–1.8 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 125-A FLAT WASHER — M6?

1.00 mm

What material, finish and strength does this page list?

Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

ISO 4759-3 — product grade A.