DIN 933 HEX BOLT — M22

DIN 933 HEX BOLT — M22: width across flats 31–32 mm, head height 13.1–14.9 mm, pitch 2.50 mm. Material A4-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per DIN 933 — product grade C.

BOLTS

High-performance industrial fastener under DIN 933 standard.

CEV-1 HASH: e6087989deb2cb05e85495c04b270999954902e156b8c56fb902633126947c89 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Width Across Flats (s)	31–32 mm
Head Height (k)	13.1–14.9 mm
Pitch	2.50 mm
Tensile Strength	700 MPa
Material	A4-70
Surface	Stainless Steel

Dimensional tolerances per DIN 933 — product grade C.

Grades

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

5.6

Grade 5.6 · Plain

8.8

Grade 8.8 · Plain

5.8

Grade 5.8 · Plain

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

10.9

Grade 10.9 · Plain

12.9

Grade 12.9 · Plain

← Back to DIN 933 HEX BOLT → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 933 reference (fasteners.eu)

DIN 933 Full Thread Hexagon Head Bolt per DIN 933 specification, available in A4-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the width across flats of DIN 933 HEX BOLT — M22?

31–32 mm (nominal with the tolerance range shown above)

What is the head height of DIN 933 HEX BOLT — M22?

13.1–14.9 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 933 HEX BOLT — M22?

2.50 mm

What material, finish and strength does this page list?

Material: A4-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

DIN 933 — product grade C.