DIN 933 HEX BOLT — M3

DIN 933 HEX BOLT — M3: width across flats 5.2–5.5 mm, head height 1.7–2.3 mm, pitch 0.50 mm. Dimensional tolerances per DIN 933 — product grade C.

BOLTS

High-performance industrial fastener under DIN 933 standard.
CEV-1 HASH: 8a0621c92110637c25eab03e6967596863732f944a8ccbfac7858611669a441f · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Width Across Flats (s)5.2–5.5 mm
Head Height (k)1.7–2.3 mm
Pitch0.50 mm
Tensile Strength—
Material—
Surface—

Dimensional tolerances per DIN 933 — product grade C.

Grades

—

No grade data available

← Back to DIN 933 HEX BOLT → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 933 reference (fasteners.eu)

DIN 933 Full Thread Hexagon Head Bolt per DIN 933 specification, available in A4-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the width across flats of DIN 933 HEX BOLT — M3?

5.2–5.5 mm (nominal with the tolerance range shown above)

What is the head height of DIN 933 HEX BOLT — M3?

1.7–2.3 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 933 HEX BOLT — M3?

0.50 mm

What material, finish and strength does this page list?

Material: —, surface: —, tensile strength: —.

Which tolerance basis is used on this page?

DIN 933 — product grade C.