DIN 934 HEX NUT — M14

DIN 934 HEX NUT — M14: width across flats 20.67–21 mm, nut height 10.79–11.21 mm, pitch 2.00 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per DIN 934 — product grade A up to M16, B above.

NUTS

High-performance industrial fastener under DIN 934 standard.

CEV-1 HASH: d8ab3bfc02e3c3b05c20a9851281a13afd476a09c0e8b05798900ff45e73c668 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Width Across Flats (s)	20.67–21 mm
Nut Height (m)	10.79–11.21 mm
Pitch	2.00 mm
Tensile Strength	700 MPa
Material	A2-70
Surface	Stainless Steel

Dimensional tolerances per DIN 934 — product grade A up to M16, B above.

Grades

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

← Back to DIN 934 HEX NUT → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official DIN standards · DIN 934 reference (fasteners.eu)

DIN 934 Hexagon Nut per DIN 934 specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the width across flats of DIN 934 HEX NUT — M14?

20.67–21 mm (nominal with the tolerance range shown above)

What is the nut height of DIN 934 HEX NUT — M14?

10.79–11.21 mm (nominal with the tolerance range shown above)

What is the thread pitch of DIN 934 HEX NUT — M14?

2.00 mm

What material, finish and strength does this page list?

Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

DIN 934 — product grade A up to M16, B above.