ISO 4032 HEX NUT — M10

ISO 4032 HEX NUT — M10: width across flats 15.73–16 mm, nut height 7.82–8.18 mm, pitch 1.50 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per ISO 4032 — product grade A up to M16, B above.

NUTS

High-performance industrial fastener under ISO 4032 standard.

CEV-1 HASH: 3bdb00f4778ce936a3794da2d4ff373bc84e77a904bb2f196aa6f47b03cb8d66 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Width Across Flats (s)	15.73–16 mm
Nut Height (m)	7.82–8.18 mm
Pitch	1.50 mm
Tensile Strength	700 MPa
Material	A2-70
Surface	Stainless Steel

Dimensional tolerances per ISO 4032 — product grade A up to M16, B above.

Grades

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

← Back to ISO 4032 HEX NUT → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official ISO standards · ISO 4032 reference (fasteners.eu)

ISO 4032 Hexagon Nut per ISO 4032 specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the width across flats of ISO 4032 HEX NUT — M10?

15.73–16 mm (nominal with the tolerance range shown above)

What is the nut height of ISO 4032 HEX NUT — M10?

7.82–8.18 mm (nominal with the tolerance range shown above)

What is the thread pitch of ISO 4032 HEX NUT — M10?

1.50 mm

What material, finish and strength does this page list?

Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

ISO 4032 — product grade A up to M16, B above.