ISO 7089 FLAT WASHER — M36

ISO 7089 FLAT WASHER — M36: inside diameter 37–37.62 mm, outside diameter 64.8–66 mm, thickness 5–6.2 mm, pitch 4.00 mm. Material A2-70, surface Stainless Steel, tensile strength 700 MPa. Dimensional tolerances per ISO 4759-3 — product grade A.

WASHERS

High-performance industrial fastener under ISO 7089 standard.
CEV-1 HASH: f0099917b6ba0df5a31ad253bde9448d23f83fd731cdb43aa0d7adce80f33375 · FROZEN: 2026-05-24 00:43:04 · ASSET: standard_map_core.csv

Material Grade Filter

Dimensions

Inner Diameter (d1)37–37.62 mm
Outer Diameter (d2)64.8–66 mm
Thickness (h)5–6.2 mm
Pitch4.00 mm
Tensile Strength700 MPa
MaterialA2-70
SurfaceStainless Steel

Dimensional tolerances per ISO 4759-3 — product grade A.

Grades

A2-70

Grade A2-70 · Stainless Steel

A2-70

Grade A2-70 · Plain

A4-70

Grade A4-70 · Stainless Steel

A4-70

Grade A4-70 · Plain

← Back to ISO 7089 FLAT WASHER → B3 Grade Matrix → Engineering Center (C)

Need technical support?

Contact engineering team for verified B2 data reference.

Standard References: Official ISO standards

ISO 7089 Flat Washer per ISO 7089 specification, available in A2-70 grade with Stainless Steel finish. Engineered for industrial OEM applications requiring 700.0 MPa tensile strength and reliable long-term fastening performance.

💬

Frequently asked questions

What is the inside diameter of ISO 7089 FLAT WASHER — M36?

37–37.62 mm (nominal with the tolerance range shown above)

What is the outside diameter of ISO 7089 FLAT WASHER — M36?

64.8–66 mm (nominal with the tolerance range shown above)

What is the thickness of ISO 7089 FLAT WASHER — M36?

5–6.2 mm (nominal with the tolerance range shown above)

What is the thread pitch of ISO 7089 FLAT WASHER — M36?

4.00 mm

What material, finish and strength does this page list?

Material: A2-70, surface: Stainless Steel, tensile strength: 700 MPa.

Which tolerance basis is used on this page?

ISO 4759-3 — product grade A.